Skip to content

LED Single Color Mini Flex Neon Lights 12V DC 12 in


Replace the old glass neon tubes with our LED 12V DC Single Color Mini Flex-Neon Light Strips. It can be used in many applications such as edge lighting graphics, sign letters, and enhancing display units or products.

The flexibility and versatility of the 12V DC LED Mini Flex Neon will allow it to easily be mounted around edges and bend around corners with a solid lighting effect. Available with a wide variety of CCTs and color options and it is rated IP65 waterproof when installed with our end caps.

Effective lighting is almost an indispensable aspect of an excellently designed exhibit display or tradeshow booth. The LED Mini Flex Neon Lights are our thinnest flexible neon lights yet. It provides the look of glass tube neon with the new advanced LED technology. Traditional glass neon lights are expensive and fragile. Our LED Mini Flex Neon is made with rugged silicone & PVC housing. It is flexible, durable, and easy to customize or install.

The 12V DC Mini Flex Neon can also be mounted into an aluminum profile channel or silicone into place. Mounting on the side of a display or cabinet can be done with regular 3M Double-faced Tape or Carpet Tape making this a simple onsite installation. 

Priced per 12" Increments, Cuttable Every 1" at the cut mark, allowing you to cut to the length desired. To Purchase Complete Roll of 75 Ft Length, Enter Quantity 75 in the Add To Cart quantity box. The Max Run of our Mini Flex Neon Lights is 20 Ft length with 100W 12V DC power supply, sold separately. Any cut section may require a 3 ft Female DC Extension Cable. It is not returnable if ordered in custom-cut lengths.

 * Required: Requires a non-dimming or dimming 12 volt DC driver.  ***1 Hour Labor Service Fee is also required when purchasing each run of LED Mini Flex Neon with soldering Female DC Hardwire power feed.

Key Features

  • Flexible, Durable, & Easy to Install
  • Maintenance-free
  • Solid-State Construction
  • High shock and Vibration Resistance
  • SMD 3528 LEDs Chipsets are high intensity, ultra-bright, and energy-efficient
  • No RF interference
  • Up to 50,000 hours Lifespan
  • Dimmable with compatible dimmer and power supply
  • Rated IP65 for Wet Locations
  • UL Listed, RoHS Compliant


  • Custom Signage
  • Tradeshows Exhibits, Retail Displays
  • Accent and decorative lighting
  • Architectural lighting for corridors, canopies, archways, or windows
  • Downlighting or Uplighting Applications
  • Backlighting or edge-lighting
  • Under-cabinet, Under-Counter, or cove lighting
  • Custom DIY project


View Spec Sheet

Brightness 400 Lumens/ft
1312 Lumens/meter
Power (Watts) 3 watt/ft
9.84 watt/meter
Input Voltage 12V DC
LED CCT & Colors 6000K Cool White
3000K Warm White
IP Rating IP65
Environment Outdoor Wet Location
LED Beam Angle 120°
Length 12 in.
Width 0.23 in / 6 mm wide
Height 0.47 in / 12 mm thick
Cutting Increment 1 in / 25.4 mm
at cut marking

Mounting Clip, Mounting Channel, End Cap

Manufacturer Elumalight
Rating UL, ETL, RoHS
Avg. Lifetime ± 30,000 - 50,000 hours
Warranty 3 years limited